单词crankcase的英汉翻译


crankcase

[kræŋkeis]
    n.[机]曲柄轴箱







单词crankcase的英汉对照例句


将曲轴齿轮和中间轴分配给曲轴箱。
Allocation of the crankshaft gearwheel and the intermediate shaft to the crankcase.
将完整单元、带哑铃轴的机油泵以及带两个正时链条的中间轴插入这半部分曲轴箱中。
Insert the complete unit oil pump with dumb-bell shaft and intermediate shaft with both timing chains into the crankcase half.
将新轴瓦的两部分插入气缸组4-6的这半部分曲轴箱中。
Insert new bearing shell halves in the crankcase half of the cylinder bank4-6.
将新轴瓦的两部分放入气缸组4-6的这半部分曲轴箱中。
Place new bearing shell halves into the crankcase half of cylinder bank4-6.
紧固悬挂系统眼孔,连接弹簧钩,并用车间式桥型吊车或发动机升降机将轴承壳从曲轴箱的半部分中吊出。
Fasten suspension eye attach spring hook and lift bearing housing out of the crankcase half using a workshop crane or engine lifter.
曲轴箱上的放油塞:
Oil drain plug on crankcase:
曲轴箱是发动机气缸体较低的部分。
The crankcase is the lower part of the engine cylinder block.
松开曲轴箱通风管。
Undo the crankcase ventilation tube.
用于曲轴箱的合金是一种过共晶合金,其中形成有硅晶体。
The alloy used for the crankcase is known as a hypereutectic alloy in which silicon crystals form.
将曲轴箱强制通风管路与分配器相连,将真空管路与调谐管橡胶套相连。
Attach positive crankcase ventilation line to the distributor and vacuum line to tuning pipe rubber sleeve.
将预先安装好的固定板放置在曲轴箱上。
Place pre-fitted retainer plate on the crankcase.
使用油石小心地清除曲轴箱孔或机油泵驱动法兰上的所有毛刺!
Carefully remove any burrs on the crankcase bore or oil pump drive flange with an oilstone.
为此,使用测径规在从曲轴箱法兰到钢圈的扁平部暘的四点上进行测量。
To do this use a calliper gauge to take measurements at four points from the crankcase flange to the flat part of the steel ring.
油盘和气缸体的下部共同称为曲轴箱,用来封闭或罩住曲轴。
"The oil pan and the lower part of the cylinder block together are called the crankcase; they enclose or encase the crankshaft."
这将防止整个进气管真空和内部曲轴箱压力影响曲轴箱强制通风,从而防止吸入发动机机油或损坏密封件。
This prevents the entire intake manifold vacuum and the internal crankcase pressure from affecting positive crankcase ventilation thereby drawing in engine oil or damaging seals.

提交更多crankcase的相关例句